|
MC110CS 10/100M RJ45 to 100M single-mode SC fiber Converter, Full-duplex,up to 20Km, chassis The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers. Features Auto negotiation of 10/100Mbps and auto MID/MID-X for TX port. Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port. Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely Extend fiber distance up to 20£60km. Easy-to-view LED indicators provide status to monitor network activity easily. External power supply. Specifications | Standards and Protocols | IEEE 802.3, IEEE 802.3u, IEEE 802.3x | | Basic Function | Half/Full-Duplex transfer mode for FX port | | Full Duplex Flow Control (IEEE 802.3x) | | Half Duplex Flow Control (Backpressure) | | Extends fiber distance up to 20km | | Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely | | Ports | 1 100M SC port | | 1 100M RJ45 port (Auto MDI/MDIX) | | Network Media | 10BASE-T | UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100O STP (maximum 100m) | | 100BASE-T | UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100O STP (maximum 100m) | | 100BASE-FX | Single-mod Fiber | | LED Indicators | PWR, FDX/Col, Link/Act, SPD | | Safety & Emission | FCC, CE | | Dimensions (W*D*H) | 3.7*2.9*1.1 in. (94.5*73.0*27.0 mm) | | Environment | Operating Temperature: 0?~40? (32?~104?)
Storage Temperature: -40?~70? (-40?~158?)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing | | Power Supply | External Power Adapter | More information of the 100M series Media Converter
| Type | Connector | Transmission Distance | Transmission Media | Output Center Wavelength | | MC100CM | RJ45--SC | 2km | Multi-mode Fiber,Cat-5 | 1310nm | | MC110CS-20 | RJ45--SC | 20km | Single-mode Fiber,Cat-5 | 1310nm | | MC110CS-40 | RJ45--SC | 40km | Single-mode Fiber,Cat-5 | 1310nm | | MC110CS-60 | RJ45--SC | 60km | Single-mode Fiber,Cat-5 | 1310nm | | MC111CS-20 | RJ45--SC | 20km | Single-mode Fiber,Cat-5 | 1550nmTX/1310nmRX | | MC111CS-40 | RJ45--SC | 40km | Single-mode Fiber,Cat-5 | 1550nmTX/1310nmRX | | MC111CS-60 | RJ45--SC | 60km | Single-mode Fiber,Cat-5 | 1550nmTX/1310nmRX | | MC112CS-20 | RJ45--SC | 20km | Single-mode Fiber,Cat-5 | 1310nmTX/1550nmRX | | MC112CS-40 | RJ45--SC | 40km | Single-mode Fiber,Cat-5 | 1310nmTX/1550nmRX | | MC112CS-60 | RJ45--SC | 60km | Single-mode Fiber,Cat-5 | 1310nmTX/1550nmRX |
 |
