|
AG188N High performance ATA with Infineon solution Features VoIP
SIP (SIP RFC3261,RFC 2543)
Support IAX2
Support T.38 fax function
Reverse polarity
Vlan
Hotline.
Call Forward, Call Transfer, 3-way conference calls
DND(Do Not Disturb),Black List,Limit List
E.164 dial plan and customized dial rules Voice
Tone generation and Local DTMF re-generation according with ITU-T
G.711(A-law or u-law) , G723, G729,ILBC
AGC(Auto Gain Control)
AEC(Auto Echo Cancellation)
VAD (Voice Activity Detection)
CNG(Comfort Noise Generation
G.168/165 compliant 32ms echo cancellation Networking
Static/Dynamic WAN-IP-Addressing
NAT,
DHCP client and server.
Support PPPoE, (used for ADSL, cable modem connecting). Protocols
MAC Address
TCP:Transmission Control Protocol
DHCP:Dynamic Host Configuration Protocol
PPPoE:PPP Protocol over Ethernet
SNTP, Simple Network Time Protocol
STUN - Simple Traversal of User Datagram ...
MD5 Message-Digest Algorithm
DNS: Domain Name Server
RTP: Real-time Transport Protocol
RTCP:Real-time Control Protocol
Telnet:Internet's remote login protocol
HTTP:Hyper Text Transfer protocol
FTP:File Transfer protocol
TFTP:Trivial File Transfer Protocol Management
Web, Telnet and Handset management.
Adjustable user password and super password
Upgrade firmware through HTTPs, HTTP,FTP, TFTP.
Telnet remote management.
Auto provision configuration file encryption Specifications Hardware
LED * 3 Interfaces
WAN * 1
LAN * 1
FXS * 1
Power jack * 1 Electric requirements
Voltage: 9V ~ 24V
Power adapter: output DC 12V/450 mA Operating requirement
Operation temperature: 0 to 40 C ( 32 to 104F)
Storage temperature: -30 to 65 C (-22 to 149F)
Humidity: 10 to 90% no dew Compliance Certificates
CE: EN55024 EN55022
FCC: part 15
ROHS in EU How to use Lifeline function? AG188 supports Lifline function, you can use the same handset to place PSTN and VoIP calls. You can receive PSTN and VoIP calls simply with configuration. To place the PSTN call, you need to set up as follow: Add new dial rule in the Dial-Peer setting, set the phone number to *T, and choose the lifline as the call mode. Add new digital mapitem in the advanced digital map, set prefix number to and *, and the length to 1 Then when you want to place a PSTN calls, you can first press to * to switch to the PSTN line and then place your call as you normal do.
 |
