|
TL-WA5110G 54M High Power Wireless Access Point (PoE) The TL-WA5110G 54M High Power Wireless Access Point is dedicated to Small Office/Home Office (SOHO) and long distance wireless network solutions. It integrates the functions of a Wireless Access Point, WISP Client, Firewall, and NAT-Router. Long distance Wireless Connectivity The High Power Wireless Access Point features high output power and high RX sensitivity can significantly extend the transmission range to reduce dead spots and to deliver a more stable wireless connection. Also supports distance control from 0km to 52.6km, which breaks through distance limitations in normal 802.11g devices, enables ultra-long distance wireless transmission. Multiple Operation Modes The TL-WA5110G provides three operation modes for multiple users to access the Internet: AP client router, AP router and AP. In AP client router mode, it works as a WISP CPE. In AP router mode, it can access the Internet via an ADSL/Cable Modem. In AP mode it can work in various modes, such as Access Point/Client/WDS Bridge/Repeater. Versatile Access Point - Bundled antenna alignment tool, which enables the best transmission and reception signals for superior wireless performance. - Bundled power injector also provides flexible installation options in hard-to-wire locations. - Integrated two useful tools: Speed Test and Throughput Monitor, user can easily get the operation information of access point without setup professional test software. - Supports Ping Watch Dog which enables the device to reboot itself if the device has any errors. This self-recover feature reduces the time spent manually configuring the device. - Bundled Client Isolation function protects the security and privacy of each individual subscriber. Therefore, subscriber does not need to worry about hacker attacks in the same wireless network. Security With the most attentive wireless security, the TL-WA5110G 54M High Power Wireless Access Point provides multiple protection measures. It can be set to turn off wireless network name (SSID) broadcast so that only stations that have the SSID can be connected. The AP provides wireless LAN 64/128/152-bit WEP encryption security, and WPA/WPA2 and WPA-PSK/WPA2-PSK authentication, as well as TKIP/AES encryption security. Easy To Use The TL-WA5110G is easy-to-manage. Quick Setup is supported and friendly help messages are provided for every step. So you can configure it conveniently and share the Internet more quickly and easily. Features -
Supports AP Client Router, AP Router and AP operation mode -
High output transmission power and reception sensitivity optimized -
Supports WISP Mode (PPPoE client on wireless interface) -
Supports Passive Power over Ethernet -
Supports Wireless Distribution System (WDS) -
Distance Adjustment for long range transmission, up to 50km -
Supports Antenna Alignment -
Supports Layer 2 User Isolation -
Provides throughput monitor indicating the current wireless throughput -
Supports Ping Watch Dog -
Supports Link Speed Test -
Supports Remote Management -
Supports PPPoE, Dynamic IP, Static IP Internet Access -
Built-in NAT and DHCP server supporting Address Reservation -
Supports UPnP, Dynamic DNS, Static Routing, VPN Pass-through -
Supports Virtual Server, Special Application and DMZ host -
Provides 64/128/152-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security and TKIP/AES encryption WLAN ACL (Access Control List) -
Supports configuration backup/restore and firmware upgrades | Software Specification | | Standards | IEEE 802.11g, IEEE 802.11b | | Wireless Signal Rates With Automatic Fallback | 11g: Up to 54Mbps(dynamic) 11b: Up to 11Mbps(dynamic) | | Frequency Range | 2.4-2.4835GHz | | Wireless Transmit Power (MAX) | 26dBm (MAX Power, For FCC) 20dBm(MAX EIRP, For ETSI) | | Modulation Technology | IEEE 802.11b: DQPSK, DBPSK, DSSS, and CCK IEEE 802.11g: BPSK, QPSK, 16QAM, 64QAM, OFDM | | Receiver Sensitivity | 802.11g 54M: -74dBm 48M: -76dBm 36M: -81dBm 12M: -89dBm 9M:-91dBm 802.11b 11M:-90dBm 5.5M:-92dBm 1M:-94dBm | | Wireless Mode | AP Router Mode AP Client Router Mode (WISP Clent) AP/Client/WDS Bridge/Repeater mode | | Wireless Range | 50km (High gain directional antenna required) | | Wireless Security | SSID Enable/Disable MAC Address Filter 64/128/152-bit WEP Encryption WPA/WPA2/WPA-PSK/WPA2-PSK (AES/TKIP) Encryption | | Hardware Specification | | Interface | One 10/100M Ethernet Port(RJ45) Support Passive PoE | | Antenna | 4dBi Detachable Omni Directional Antenna (Reverse SMA Connector) | | Power Supply Unit | Input: Localized to Country of Sale Output: 12VDC / 1.0A Switching PSU | | Operating Temperature | -10°C~40°C (14?~104?) | | Storage Temperature | -40°C~70°C (-40?~158?) | | Relative Humidity | 10% ~ 90%, Non Condensation | | Storage Humidity | 5%~95% Non-Condensing | | Dimensions | 6.5 × 4.2 × 1.1 in. (165 × 108 × 28mm) |
 |
