Click to enlarge

VDSL2 Ethernet SLAVE Terminal. Range up to 300 m. Bandwitdh up to 100 Mb/s

VDSL2 Netsys NV-600R

Technology

VDSL2 (Very-High-Bit-Rate Digital Subscriber Line 2, ITU-T G.993.2 Standard) is an access technology that  exploits the existing infrastructure of copper wires that were originally deployed for POTS services. It can be deployed from central offices, from fibre-fed cabinets located near the customer premises, or within buildings.

ITU-T G.993.2 VDSL2 is the newest and most advanced standard of DSL broadband wire line communications.

Designed to support the wide deployment of Triple Play services such as voice, video, data, high definition

television (HDTV) and interactive gaming, VDSL2 enables operators and carriers to gradually, flexibly, and cost  efficiently upgrade existing xDSL-infrastructure.

ITU-T G.993.2 (VDSL2) is an enhancement to G.993.1 VDSL that permits the transmission of asymmetric and symmetric (Full-Duplex) aggregate data rates up to 200 Mbit/s on twisted pairs using a bandwidth up to 30 MHz.

Description

Netsys' NV-600L is a VDSL2 Modem leverages the extraordinary bandwidth promise of VDSL2 (max. 100Mbps Symmetric) technology, the next step in the delivery of new high-speed Internet applications to end-users in their homes or offices. Quick, easy and economical to install and maintain, the NV-600L works with the NV-600R over existing copper wire infrastructure. NV-600L is a CO (Central Office) device.

VDSL2 will allow operators worldwide to compete with cable and satellite operators by offering services such as HDTV, VOD, videoconferencing, high speed Internet access and advanced voice services including VoIP, over a standard copper telephone cable.

VDSL2 is seen by many operators as an ideal accompaniment to a fiber to the premises (FTTP) rollout, where for instance fiber is supplied direct to an apartment block and from there copper cable is used to supply residents with high-speed VDSL2.

Key Features & Benefits

        ·          Compliant with IEEE 802.3 & 802.3u Ethernet Standards

·          Compliant with ETSI, ITU, ANSI VDSL standards

·          Provides 4 x 10/100M auto-sensing RJ-45 Ethernet ports

·          POTS / ISDN Splitter port RJ-11 x 1 (Splitter on board)

·          VDSL2 RJ-11 port x 1

·          Supports Bandwidth setup with 100 Mbps VDSL RJ-11 ports

·          LED indicators: Power LED x1, Ethernet Link/Active LED x 4, VDSL Link LED x 1

·          Supports auto speed for VDSL2 port

·          Supports Web management(HTTP) & TFTP, Console(RS232)

·          Supports PPPOE

·          Supports uPnP (PLUG & PLAY)

·          Supports NAT/DHCP/DMZ

·          Supports Firewall

·          Supports Route & Switch mode

·          Supports Loop back

·          Supports SNR indicator for check phone wiring quality.

·          Provides surge protection for VDSL2 port

·          Switch method : store and forward, Half duplex : Back pressure

·          Driver capable : 100 Mbps / 0.3 Km

·          Power consumption : 7.5w

·          Dimension: L x W x H = 184mm x 146mm x 40mm(7.2" x 5.74" x 1.57")

·          Operating temperature: 0°C to 50°C (32 to 122F)

·          Storage temperature: -20 to 65°C (-4F to 149F)

·          Operating humidity: 10% to 90% (non-condensing)

·          AC-to-DCadapter: Input range: 100VAC~240VAC/50~60Hz, Output: 12VDC/1A

·          EMI Compliant: CE, FCC, VCCI

·          Chipset: Infineon.