Click to enlarge

FEATURES

• High speed by fully compliant with 802 11b/g (up to 54Mbps) and by supporting Turbo-mode.
• High and adjustable RF power (up to 23dBm/200mW) for wider signal coverage range: In an open field test with 15dBi antenna, the measured throughput is about 12Mbps and 3Mbps at the distance of 1.8Km and 4.6Km respectively.
• Weatherproof and watertight from its rugged metal housing (IP67 Approved).
• Power over Ethernet (PoE) built-in for single cable installation.
• On board Ethernet surge protection.
• Dual function support:
  • When in its AP mode, CPE100 works like a conventional AP, and can support universal repeater or WDS repeater.
  • When in its CPE mode, it behaves like an AP in the client mode. Its wireless link is connected up to WISP's outdoor wireless backhaul. Its built-in gateway enables WISP subscribers at the premises site to share the connection without the need for extra gateway.

• Special features that support WISP's revenue generating operation:
  • Web-based administration tool with two types of administrators. For example, WISP administrator can set bandwidth control while local administrator can not (CPE mode).
  • Support for RADIUS accounting (AP mode).
  • Support for multiple user authentication methods (CPE mode):
  • MAC ACL
  • Pre-shared key
  • MAC authentication against RADIUS server
  • 802.1X against RADIUS server
  • Web based login (when deployed under a network access controller such as 4ipnet MSG100)

• Full range of wireless security mechanisms such as WEP, WPA and WPA2 (802.11i) that are important for enterprise wireless deployments.

SPECIFICATIONS

Wireless and Wired Interface Standard

• Wireless:
  • IEEE 802.11g (up to 54Mbps) and Turbo mode
  • IEEE 802.11b (up to 11Mbps)
• Ethernet: 1x IEEE 802.3 and IEEE 802.3u

Wireless Radio

• Frequency band: 2.4 GHz
• Modulations:
  • 802.11b: DSSS (CCK, DQPSK, DBPSK)
  • 802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK)
• Channels:
  • USA (Channel 1~11)
  • Japan (Channel 1~14)
  • Europe (Channel 1~13)
• Data rate with auto fallbak: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, and 1 Mbps
• Receiver sensitivity:
  • 802.11b: 11Mbps@-83dBm
  • 802.11g: 54Mbps@-68dBm
• RF transmission power: 23dBm / 200mW

General Access Point Features

• Number of ESSID: 1
• Number of associated clients per AP: 64
• Dual mode: Access Point Mode and CPE mode
• WDS repeater: To extend wireless coverage by connecting wirelessly to another WDS capable AP - support for up to 8 WDS links
• Universal repeater: To extend wireless coverage by having the device to act as AP and STA client simultaneously
• Beacon interval: Adjustable to best adapt to the deployment environment
• Auto fallback: Data rate for long distance communication in noisy environments
• IAPP: To provide a faster roaming capability for the stations among different APs nearby
• 802.11g protection: To let the transmission rate of the associated 802.11g stations not to be affected with surrounding existence of 802.11b stations
• RTS/CTS and fragmentation control
• ACK timeout support
• Adjustable transmission power: 5 levels
• Wireless site survey: For scanning the surrounding access points for connection

Gateway Features in CPE Mode

• Built-in NAT mode: To support IP sharing on the LAN side for multiple users (subscribers) to get access to the Internet
• Built-in DHCP server for issuing local IP addresses
• Built-in DDNS/DNS client
• Bandwidth management: To limit the uplink and downlink throughput
• Client connection control: For WISP's operator to remotely suspend or resume the service for subscribers at the CPE
• IP/Port forwarding and DMZ

Security

• Data encryption: WEP (64/128-bits), WPA/WPA2 with TKIP or AES-CCMP
• User Authentication: WEP, IEEE 802.1X, WPA-PSK, WPA-RADIUS, MAC ACL, MAC authentication using RADIUS
• Built-in 802.1X Authenticator
• Setting for TKIP / CCMP / AES key's refreshing period
• Supports IEEE 802.11 mixed mode; open and shared key authentication
• Hidden ESSID: Broadcast SSID option can be turned off to prevent SSID broadcast to the public
• Station Isolation setting: When enabled, all stations associated with this AP can not communicate with each other
• Supports data encryption over WDS link

Administration

• Web-based management interface
• Remote configuration and management
• Remote firmware upgradeable
• Software one-button-click to reset factory defaults
• Utilities for system configuration backup and restoration
• Two administration accounts in CPE mode:
  • "root" for WISP's administrator, who can change all settings including bandwidth limit
  • "admin" for the local administrator, who can view all settings and change only some preferences
• SNMP MIBII support (v1/v2c)
• NTP time synchronization
• Watch dog: Auto recovery while detecting fault in the system
• Syslog client
• Supports Event Log
• Supports SYSLOG reporting to external server
• Supports RADIUS accounting and accounting update
• Supports statistics on total transmission encountered and transmitting error occurred

Hardware Specifications

• Metal case: Weatherproof, compliant with IP67 Standard
• On board surge protection
• LED Indication: Power x 1; Ethernet x 1; Wireless x 1

Physical and Power

• PoE: DC 48V/0.4A
• Form Factor: Wall or Pole Mountable
• Dimensions (W x D x H): 6.5" x 3.8" x 1.9" ( 165 x 96 x 48 mm)
• Weight: 1.6 lbs (0.72 kg)

Environment

• Operation Temperature: -20 ~ +70 °C
• Storage Temperature: -30 ~ +85 °C
• Operation Humidity: 100% maximum (Non-condensing)
• Storage Humidity: 100% (Non-condensing)

Standard Pack Accessories

• PSE (Power Sourcing Equipment) x1
• AC Cable x 1
• Mounting Kit x 1
• Waterproof Connector Pack x 1